Pay equity software for small business teams that need a band behind every salary
Pay equity software for a company of 10 to 200 people has one job: show, role by role, who is paid below or above a sourced market band and whether the pattern follows gender, race or anything else you cannot defend. WageList builds that band from public BLS wage data, so every pay gap check starts from a number you can explain.
Enterprise pay equity platforms run regression models and are priced for thousands of employees. This page covers what a smaller team actually needs, a worked example with real arithmetic, and the point at which you should add a statistical analysis. Build a band on the right to see the midpoint every check depends on.
General information, not legal advice
- P25
- $0
- P50 ยท Median
- $0
- P75
- $0
Suggested posted range
Built from public U.S. BLS OES wage data (May 2025 release), adjusted for market, seniority, company stage and, when you pick one, industry, by the multipliers published in our methodology.
Get bands for your whole team
Get startedWhat pay equity software has to do at your size
Strip away the dashboards and every pay equity review is three steps. Decide what a job is worth in the market, compare each person's pay to that number, then look at who ends up on which side of it. The first step is the weak one at most small companies. Without a band, a gap is only a difference of opinion between two managers, and nobody can say which salary is wrong.
That is why the first feature to look for is not the analytics, it is the benchmark. A tool that asks you to upload salaries and returns a gap percentage, but has no market reference, can only tell you that two people differ. It cannot tell you whether the higher or the lower salary is the outlier, and that is the question you will be asked if a claim arrives.
- A sourced band per role with a low, midpoint and high, and a method you can describe in a sentence.
- A compa-ratio per employee, pay divided by band midpoint, so a gap becomes a number you can sort.
- A like-for-like comparison, same role and level, because comparing a director with a coordinator proves nothing.
- A record of the band, the date and the reason for any exception.
A pay gap check on one role with real arithmetic
The numbers below are illustrative, not a market claim. Take a company with eight customer success managers. The band for the role has a midpoint of $80,000, a low of $68,000 and a high of $92,000. Pay divided by $80,000 gives the compa-ratio.
| Employee | Tenure | Salary | Compa-ratio |
|---|---|---|---|
| A (woman) | 4 years | $74,000 | 0.93 |
| B (man) | 4 years | $84,000 | 1.05 |
| C (woman) | 2 years | $72,000 | 0.90 |
| D (man) | 2 years | $79,000 | 0.99 |
| E (woman) | 1 year | $70,000 | 0.88 |
| F (man) | 1 year | $78,000 | 0.98 |
| G (woman) | 3 years | $76,000 | 0.95 |
| H (man) | 3 years | $82,000 | 1.03 |
The four women average a compa-ratio of 0.91 and the four men average 1.01. At the same tenure the pairs differ by $10,000 at four years, $7,000 at two years, $8,000 at one year and $6,000 at three. Every woman sits below the midpoint and every man is within two points of it or above. Nobody is outside the band, so a simple "is everyone in range" check passes while the pattern is plain.
The cost to correct is concrete. Raising the four women to a compa-ratio of 0.98, or $78,400, costs $21,600 a year in salary. Matching each woman to her same-tenure peer costs $31,000. Payroll taxes come on top, still small next to a claim that can carry back pay, damages and fees. With eight people there is no regression to run. You see the problem, and you can show a decision, because the band tells you which number is the reference.
Bands and compa-ratios compared with regression-based platforms
Both approaches are legitimate. They answer different questions at different company sizes.
| Question | Sourced bands and compa-ratio | Regression-based platform |
|---|---|---|
| Best for | 10 to 200 employees, few people per role | Hundreds or thousands of employees, many per job family |
| Shows | Each person against the market, pattern by group inside a role | Unexplained gap after controls such as level, location and tenure |
| Needs | A role title and a salary per person | Clean HRIS data, job architecture and group sizes large enough for statistics |
| Also gives you | Ranges for postings and offers, which several states require | Remediation modeling and board-level reporting |
| Where it falls short | Not a privileged statistical study | Unstable results with tiny groups, and priced for enterprise budgets |
If you are heading toward 500 employees, a pending claim or a regulator inquiry, bring in counsel and a statistical analysis. The bands do not go to waste. A regression needs a defensible job structure, and the one you build now is the one it will use.
What the law asks of a small employer
Federal law prohibits pay discrimination without requiring an audit. The Equal Pay Act covers sex-based pay differences for substantially equal work, and Title VII covers pay discrimination by sex, race and other protected characteristics. The EEOC page on equal pay and compensation discrimination explains both.
The practical pressure now comes from the states. Where a range must be posted or handed over, the range itself becomes evidence of how you set pay. The state-by-state requirements are laid out in our guide to pay transparency laws by state, and how to run a pay equity audit covers the review process step by step.
A pay equity review you can finish in an afternoon
- Export role, level, location, start date and salary for every employee.
- Build a band for each role in WageList with your location and level.
- Compute compa-ratios with the compa-ratio calculator or a spreadsheet column.
- Sort by role and level and compare group averages, as in the example above.
- Write down each exception, either a documented reason such as scarce skills or a raise scheduled in the next cycle.
- Re-run at every offer, so the gap is never created in the first place.
Companies that also work out an salary structure with grades have fewer exceptions to explain, since each job already maps to a range.
Pay equity software questions answered
What is pay equity software?
Pay equity software compares what people in comparable jobs are paid and flags gaps that a protected characteristic, a missing band or an inconsistent offer could explain. Enterprise tools run regression models across thousands of employees. For a company of 10 to 200 people, the practical version is a documented pay band for every role plus a compa-ratio for every person.
Do I need regression-based pay equity analysis software at 100 employees?
Usually not as a first step. Regression needs enough people per job family to produce a stable result, and most small companies have one to four people in a role. Start with bands and compa-ratios, which show gaps person by person, and add a statistical analysis through counsel when headcount or a claim calls for it.
How do you measure pay equity in a small company?
Set a market band for each role, compute every employee's compa-ratio (pay divided by the band midpoint), then compare compa-ratios across gender, race and other groups inside the same role and level. A group that sits consistently lower in the band for the same job is the pattern to investigate and explain or fix.
Is a pay equity audit required by law?
Not federally. The Equal Pay Act and Title VII prohibit pay discrimination but do not require an audit. A few jurisdictions ask for pay data reporting, such as California for larger employers, and several states require wage ranges in postings or on request. An audit is a way to find problems before a claim does.
Can WageList run a pay equity analysis?
WageList builds the market bands and the midpoints that every pay equity check depends on, from public BLS wage data with a documented method. You then compare each person against their band. It does not replace a privileged statistical analysis by an attorney or consultant when you need one.
How often should a small company check pay equity?
Once a year at minimum, usually just before or just after the merit cycle, and at every offer. Checking at offer is the cheapest control because the new hire is the moment most gaps are created. A band with a documented range makes the offer check a thirty-second lookup.
WageList
Put a sourced band behind every salary
WageList builds pay bands for teams of 10 to 200 from public BLS wage data with a documented method, so every pay gap check starts from a reference you can defend. See pricing and create your account to have bands for your roles the same day.